Clear-Com BS850 (Last time buy) - Manual (Page 27)

Page Output Mixing (continued):
Select the box(es) next to Rx1-Rx4, then use the
control knob to adjust output level in 0.25dB or
2.25dB increments for the desired mix.
Check these boxes only if you want receiver audio
continuously fed to the Page Output. Leave them
unchecked for normal operation.
Place the cursor to the left of the bar below Page:dB
and use the control knob to adjust the overall Page
audio output level in 1.5dB increments.
Intercom Output Mixing:
Select Ch1 or Ch2, then select the box next to Aux
and/or Mic to enable input. Use the control knob
to adjust output level in 0.25dB or 2.25dB
increments for the desired mix.
Place the cursor to the left of the bar below Ch:dB
and use the control knob to adjust the overall
intercom audio output level in 1.5dB increments.
Intercom Output Mixing (continued):
Select Ch1 or Ch2, then select the box(es) next to
Rx1-Rx4 to enable input. Use the control knob to
adjust output level in 0.25dB or 2.25dB
increments for the desired mix.
Check these boxes only if you want receiver audio
continuously fed to the Intercom Output. Leave
them unchecked for normal operation.
Place the cursor to the left of the bar below Ch:dB
and use the control knob to adjust the overall
intercom audio output level in 1.5dB increments.
Headset Output Mixing:
Select HSL (headset left) or HSR (headset right),
then select the box next to Ch1, Ch2, Aux and/or
Mic to enable input. Use the control knob to
adjust output level in 0.25dB or 2.25dB
increments for the desired mix.
Place the cursor to the left of the bar below HS:dB
and use the control knob to adjust the overall
headset audio output level in 1.5dB increments.
24