ADTRAN Total Access 1240 - Manual (Page 70)

Total Access 1240 Installation and Maintenance Practice
5-30 61179605L5-5B
Current Bridge Statistics Menu
The Current Bridge Statistics menu (see
Figure 5-21 ) is used to select a bridge and view and
reset current port statistics.
NOTE
On the Current Bridge Statistics menu, Transmit Statistics refers
to data from the Total Access 1240 to the customer modem, and
Receive Statistics refers to data from the customer modem to the
Total Access 1240.
Figure 5-21. Current Bridge Statistics Menu
The Current Bridge Statistics menu options are shown in Table 5-21 .
The Current Bridge Statistics menu fields are shown in Table 5-22 .
Table 5-21. Current Bridge Statistics Menu Options
Option Description Function
1 Port This option is used to select a port.
2 Bridge This option is used to select a bridge.
Total Access 1240 - IPoE Fed
Unacknowledged Alarms: INFO
Circuit ID: No Circuit ID
Current Bridge Statistics
VC Enabled
Modem Not Trained 1. Port 1
Interface Mode: 2-wire 2. Bridge 1
Selection :
Transmit Statistics Receive Statistics
Good Packets: 0 Good Packets: 0
Bad Packets: 0 Bad Packets: 0
Good Bytes: 0 Good Bytes: 0
Bad Bytes: 0 Bad Bytes: 0
ATM Statistics
Tx Cells: 0 Rx Cells: 0
'C' - Clear Current Statistics 'M' - Next Bridge
'J' - Go to Previous Statistics Screen 'N' - Next Port 'P' - Previous Port
'?' - System Help Screen