ADTRAN Total Access 1240 - Manual (Page 105)

Section 5, User Interface - Menu Descriptions
61179605L5-5B 5-65
SHDSL Ports Menu
The SHDSL Ports menu (see Figure 5-46 ) is used to provision all SHDSL ports.
Figure 5-46. SHDSL Ports Menu
The SHDSL Ports menu options are shown in Table 5-47 .
Table 5-47. SHDSL Ports Menu Options
Option Description Function
1 Configuration This option displays the “SHDSL Loop 1 Configuration
Screen” on page 5-66.
2 Provisioning This option displays the “Provisioning Menu” on page
5-68.
3 Status This option displays the “SHDSL Loop 1 Status Menu”
on page 5-80.
4 Alarms This option displays the “Alarm Status Screen” on
page 5-82.
5 Test This option displays the “SHDSL Loop 1 Test Menu” on
page 5-83.
6 Performance This option displays the “SHDSL Loop 1 Performance
Screen” on page 5-88.
7 Remote Terminal This option is used to set a remote terminal. SHDSL
provides an overhead channel (EOC) over which the
Total Access 1240 can configure the NTU (SHDSL
modem).
09/01/05 03:56
Total Access 1240
SHDSL Ports
1. Configuration
2. Provisioning
3. Status
4. Alarms
5. Test
6. Performance
7. Remote Terminal
Selection:
'?' - System Help