ADTRAN Total Access 1240 - Manual (Page 112)

Total Access 1240 Installation and Maintenance Practice
5-72 61179605L5-5B
SHDSL Loop 1 Service State Menu
The SHDSL Loop 1 Service State menu (see
Figure 5-52 ) is used to set the loop service state.
The default value is Out of Service-Maintenance.
Figure 5-52. SHDSL Loop 1 Service State Menu
The SHDSL Loop 1 Service State menu options are shown in Table 5-52 .
Table 5-52. SHDSL Loop 1 Service State Options
Option Description Function
1 In Service This option makes SHDSL services available, if installed,
and Link Down and Threshold alarms are reported.
2 Out of Service-Unassigned This option makes SHDSL services unavailable, and no
Link Down and Threshold alarms are reported.
3 Out of Service-Maintenance This option makes SHDSL services available, and no
Link Down and Threshold alarms are reported.
09/01/05 03:58
Total Access 1240
SHDSL Loop 1 Service State
1. In Service
2. Out of Service - Unassigned
3. Out of Service - Maintenance
Selection:
'?' - System Help