ADTRAN Total Access 1240 - Manual (Page 54)

Total Access 1240 Installation and Maintenance Practice
5-14 61179605L5-5B
The Bridge User Port Provisioning menu options are shown in Table 5-8 .
Table 5-8. Bridge User Port Provisioning Menu Options
Option Description Function
1 Port This option is used select a Port (1-24).
2 Bridge This option is used to assign a bridge number to each
circuit. Each circuit must be assigned to one of four
bridges.
3 Circuit ID This option is used to assign a text name to the circuit
for use by the provider to identify the circuit.
4 VPI This option is used to configure each circuit with the
Virtual Path Identifier (VPI) to match the modem that the
customer is using.
5 VCI This option is used to configure each circuit with the
Virtual Channel Identifier (VCI) to match the modem
that the customer is using.
6 Priority This option is used to assign strict prioritization to each
circuit. See
“Strict Prioritization” on page 5-15.
7 Select Destination Mac Filters This option displays the “Router Dest Mac Filtering
Menu” on page 5-19.
8 VLAN ID This option is used to assign a VLAN ID. The VLAN ID is
used to uniquely identify a particular VLAN per IEEE
802.1.Q. The parameter for a VLAN ID is a number
between 1 and 4094.
9 VLAN Priority This option displays the “VLAN Priority” on page 5-16.
10 Ether Type This option is used to assign EtherType Filtering which
is selectable as Any, IP, or PPPoE. See
“EtherType
Filtering” on page 5-17.
11 Local Switching This option is used to enable or disable Local Switching.
Selection of this option toggles between Y(es) and N(o).
See
“Local Switching” on page 5-18.
12 Enabled/Disabled This option is used to enable or disable the user port.
13 Save Changes This option is used to save any changes made to the
Bridge User Port menu.
This option must be used to implement any provisioning
adjustments.
14 Apply To Other Ports This option displays the “Apply Provisioning to Ports
Menu” on page 5-21.