ADTRAN Total Access 1240 - Manual (Page 114)

Total Access 1240 Installation and Maintenance Practice
5-74 61179605L5-5B
SHDSL Loop 1 Rate Screen
The SHDSL Loop 1 Rate screen (see
Figure 5-54 ) is used to set the rate for the Circuit ID.
Figure 5-54. SHDSL Loop 1 Rate Screen
The rates defined in SHDSL standard G.991.2 are N × 64 kbits/s, where N = 3 (192 kb/s) to
36 (2304 kb/s).
09/01/05 03:09
Total Access 1240
SHDSL Loop 1 Rate
Enter a value for N from 3 to 36, where
the payload rate = N x 64 Kbps:
'?' - System Help