GF Signet i-Go 8058 Signal Converter - Manual (Page 3)

3 8058 i-Go™ Signal Converter
8058-2 DIN Rail Mount to Signet 9900 Transmitter
1. Wire ONLY Channel 1, terminals 1 and 2, of the 8058-2 between the 4 to 20 mA loop
source and the 9900 S 3 L input terminals as illustrated.
2. In the 9900 INPUT TYPE menu, specify 4-20 mA INPUT.
Set additional labels and abbreviations per the 9900 instructions.
3. Follow complete instructions in the 9900 manual.
CAUTION
Loop power must not exceed 35 VDC.
NOTE: Connect
Channel 1 ONLY.
+
-
+
-
3 2 1
6 5 4
7 8 9
Loop1
PWR
N/C
S L
DATA
3
Loop2
PWR
+GF+ SIGNET
DA
T
A
GND
V+
SHLD
Power
Supply
12-24 VDC
4-20 mA Loop 1
Source
BLACK (5 VDC)
BLACK
BLACK
RED
WHITE (GND)
RED (S 3 L)
9900 S 3 L
Terminals
9900 S 3 L
Terminals
7
6
5
13
12
11
Input
4-to-20 mA
Output
S
3
L
Signet 8058 i-Go™
4-20 mA to S 3 L Converter
+GF+
4-20 mA input S 3 L Output
+
-
+
-
BLACK (5 VDC)
RED (S 3 L)
WHITE (GND)
8350-1
8450-1
Terminals
8250-2
8350-2
8450-2
Terminals
RED
4 to 20 mA
Loop Source
Loop Power
VDC
Tie SHIELD
to BLACK
SHIELD
BLACK
Tie SHIELD
to WHITE
16
15
14
13
12
11
18
17
16
15
14
13
Input
4-to-20 mA
Output
S
3
L
Signet 8058 i-Go™
4-20 mA to S 3 L Converter
+GF+
4-20 mA input S 3 L Output
Input
4-to-20 mA
Output
S
3
L
Signet 8058 i-Go™
4-20 mA to S 3 L Converter
+GF+
4-20 mA input S 3 L Output
+
-
+
-
+
-
+
-
8350-3
8450-3
Terminals
8250-3
Terminals
BLACK (5 VDC)
RED (S 3 L)
RED (S 3 L)
WHITE (GND)
BLACK (5 VDC)
WHITE (GND)
Tie SHIELD
to WHITE
Tie SHIELD
to WHITE
RED
4 to 20 mA
Loop Source
Loop Power
VDC
Tie SHIELD
to BLACK
SHIELD
4 to 20 mA
Loop Source
Loop Power
VDC
BLACK
RED
BLACK
Tie SHIELD
to BLACK
SHIELD
When used in conjunction with the Signet ProcessPro Pressure, Temperature or Level Transmitters, the 8058 serves to expand the
operating range beyond the specifi cations of sensors available directly from Signet.
1. Order the 8058 according to the instructions on page 4. The 8058 MUST be factory confi gured for these applications.
2. Connect the 8058 between the 4 to 20 mA loop source and the ProcessPro S
3 L input terminals as illustrated.
3. Follow the complete CALIBRATION instructions in the ProcessPro manual.
Wiring: 8058-1 Wire Mount to Signet 8250, 8350 and 8450 ProcessPro Transmitters
CAUTION
Loop power must not exceed 35 VDC.
1. Wire the 8058-1 between the 4 to 20 mA loop source and the 9900 S 3 L input terminals as illustrated.
2. In the 9900 INPUT TYPE menu, specify 4-20 mA INPUT.
Set additional labels and abbreviations per the 9900 instructions.
3. Follow complete instructions in the 9900 manual.
8058-1 Wire Mount to Signet 9900 Transmitter
CAUTION
Loop power must not exceed 35 VDC. Signet 8058 i-Go™
4-20 mA to S 3 L Converter
Output
S
3
L
S 3 L Output
DA
T
A
GND
V+
SHLD
Black
Red
Shield
White
8058-1
8058-2