GF Signet i-Go 8058 Signal Converter - Manual

Signet 8058 i-Go™ Signal Converter
Description
The 8058 Signal Converter accepts any 4 to 20 milliamp (mA) signal and converts it into the serial data format known as S 3 L (Signet
Serial Sensor Link) for use by the Signet 8250, 8350, 8450, and Multi-Parameter and SmartPro instruments.
• When used with the Multi-Parameter and SmartPro instruments, all programming uses the instrument's familiar setup menus.
• When used with ProcessPro transmitters, the 8058 is confi gured at the factory to the user's specifi cations.
• The 8058-1 wire-mount version is easily mounted anywhere in the interconnnecting wiring between a single 4 to 20 mA source and
the instrument.
• The 8058-2 DIN-rail mounted version converts two separate 4 to 20 mA source signals into the S 3 L format.
*3-8058.090*
3-8058.090
Rev. D 06/12 English
Input
4-to-20 mA
Output
S
3 L
Signet 8058 i-Go™
4-20 mA to S 3 L Converter
+GF+
4-20 mA input S 3 L Output
4-20 mA
Input
N/C
3
Loop1 -
2
Loop1 + 1
+GF+
S L
Output 3
7 +5VDC 8 S L 9 GND 3
8 058
i-Go™
4-20
m A to S 3 L C on ve rte r
3-80 58.6 10D
35V DC MA X
N/C
6
Loop2 -
5
Loop2+
4
3 2 1 6 5 4
7 8 9
Lo op1 PW R
+GF +
N/C
S L DATA 3
Loo p2 PW R
Sig net 8058
Specifi cations
General
Input:
4 to 20 mA current loop(s), passive
(external power required)
Input range: 3.6 to 22.1 mA
Output: Digital (S 3 L) output
3-8058-2: calibrated mA
Accuracy: ± 32 μA @ 25 °C
Resolution: < 16 μA
Update rate: 500 mS
Temp. Drift: ±1 μA per °C, max.
Electrical
Power req.:
4.5 to 6.5 VDC @ < 3.0 mA
Max. voltage: 35 VDC
Max. current: 40 mA
Isolation: Up to 48 V AC/DC
Voltage drop: 5 VDC max.
Reverse polarity protected
Cable:
3-8058-1: 400 mm (15 in.) input,
200 mm (8 in.) output
3-8058-2: No cable provided
(customer supplied)
Max. recommended cable extensions:
•
Loop in: 300 m (1000 ft)
• S 3 L out: per S 3 L guidelines
Environmental
Operating Ambient Temperature:
-10 to 55 °C (14 to 131 °F)
Storage Temperature:
-20 to 85 °C (-4 to 185 °F)
Relative Humidity:
3-8058-1: 0 to 100%, condensing
3-8058-2: 0 to 90%, non-condensing
Shipping Weight:
3-8058-1: 0.09 kg (0.20 lb)
3-8058-2: 0.11 kg (0.25 lb)
Standards and Approvals
CE
Dimensions
Input
4-to-20 mA
Output
S
3 L
104mm
(4.1 in.)
16 mm
(0.63 in.)
Signet 8058 i-Go™
4-20 mA to S 3 L Converter
+GF+
4-20 mA input S 3 L Output
3-8058-1 Signal Converter, wire-mount
114.5 mm (4.51 in.)
99 mm (3.90 in.)
22.5 mm
(0.89 in.)
3-8058-2 Signal Converter, DIN-rail mount
104 mm
(4.1 in.)
16 mm
(0.63 in)
English
China RoHS (Go to gfsignet.com for details)