Burkert Type 8041 - Manual (Page 19)

17
INstallation
Warning
risk of injury due to non-conforming installation.
• The electrical and fluid installation can only be carried out by
qualified and skilled staff with the appropriate tools.
• Install appropriate safety devices (correctly rated fuse and/or
circuit-breaker).
risk of injury due to unintentional switch on of power supply
or uncontrolled restarting of the installation.
• Take appropriate measures to avoid unintentional activation of
the installation.
• Guarantee a set or controlled restarting of the process subse-
quent to any intervention on the device.
Warning
risk of injury if the fluid temperature/pressure dependency is
not respected.
• Observe the fluid temperature/pressure dependency according
to the nature of the material of the fitting used (see Fig. 6 and
Fig. 7).
8.2. installation onto the pipe
8.2.1. recommandations for installing the
8041 on the pipe
→
Choose a fitting appropriate to the velocity of the fluid inside the
pipe; refer to the graphs below:
English
Type 8041