General information, Manufacturer's address and international contacts, Warranty conditions – Burkert Type S020 User Manual
Page 7: Information on the internet
7
Generalinformation
Type S020
Various dangerous situations (cont'd)
To avoid injury take care:
• to observe the general technical rules when installing and using
the fitting.
• not to use this fitting in explosive atmospheres.
• not to use fluid that is incompatible with the materials from which
the fitting is made.
• not to use this fitting in an environment incompatible with the
materials from which it is made.
• not to subject the fitting to mechanical loads (by placing objects
on top of it or by using it as a step, for example).
• not to make any internal or external modifications to the fitting.
note
the fitting may be damaged by the fluid in contact with.
• Systematically check the chemical compatibility of the com-
ponent materials of the fitting and the fluids likely to come into
contact with it (for example: alcohols, strong or concentrated
acids, aldehydes, alkaline compounds, esters, aliphatic com-
pounds, ketones, halogenated aromatics or hydrocarbons,
oxidants and chlorinated agents).
4.
generAl informATion
4.1.
manufacturer's address and
international contacts
To contact the manufacturer of the fitting, use following address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
The addresses of our international branches can be found on the
last pages of these operating instructions.
They can also be found on the Internet at:
4.2.
Warranty conditions
The condition governing the legal warranty is the conforming use of
the S020 in observance of the operating conditions specified in this
manual.
4.3.
information on the internet
You can find the operating instructions and the technical data sheet
regarding the type S020 at:
English