Installation onto the pipe, Recommandations for installing the s020 fitting, On the pipe – Burkert Type S020 User Manual
Page 30
30
Installationandcommissioning
Type S020
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-20
0
+20 +40 +60 +80 +100 +120
PVDF (PN10)
PVC (PN10)
PP (PN10)
T (°C)
P (bar)
PVC + PP
PVDF
+150
DN100 for measuring
devices with clamp connection
(PN10)
Metal
(PN16)
1)
1)
Except DN100 for measuring devices with clamp connection
Fig. 5: Fluid pressure / temperature dependency curves for T
fittings used on their own
7.2.
installation onto the pipe
7.2.1. recommandations for installing the
S020 fitting on the pipe
→
To measure the pH or the oxidation reduction potential, install
a U-shaped bypass in order to prevent the electrode drying out
and to allow calibration without stopping the process.
Fig. 6: Bypass installation of the fitting
→
For measuring the flow and depending on the design of the
pipes, respect the minimum distances in accordance with the
standard EN ISO 5167-1, from which the diagrams in Fig. 7 are
excerpted.
English