Burkert Type 2301 - Manual (Page 5)

5
Intended use
2 inTenDeD use
non-intended use of the globe control valve type 2301 may be
a hazard to people, nearby equipment and the environment.
▶ The device is designed for the controlled flow of liquid and
gaseous media. Operation is possible only in combination with a
suitable control unit.
▶ The admissible data, the operating conditions and conditions of
use specified in the contract documents, operating instructions
and on the type label are to be observed during use. The desig-
nated application cases are specified in the chapter entitled
“5 Product description”.
▶ The device may be used only in conjunction with third-party
devices and components recommended and authorised by
Bürkert.
▶ Correct transportation, correct storage and installation and
careful use and maintenance are essential for reliable and fault-
less operation.
▶ Use the device only as intended.
2.1 restrictions
If exporting the system/device, observe any existing restrictions.
3 Basic safeTy
insTrucTiOns
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation.
operation and maintenance of the devices.
• local safety regulations; the operator is responsible for observing
these regulations, also with reference to the installation personnel.
Danger!
danger – high pressure!
▶ Before loosening the lines and valves, turn off the pressure and
vent the lines.
risk of electric shock!
▶ Before reaching into the device, switch off the power supply
and secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulations
for electrical equipment!
Warning!
risk of injury when opening the actuator!
The actuator contains a tensioned spring. If the actuator is
opened, there is a risk of injury from the spring jumping out!
▶ The actuator must not be opened.
risk of injury from moving parts in the device!
▶ Do not reach into openings.
english
Type 2301