Dynasonics MFX Series Insertion MagProbe Flow Meter - Manual (Page 49)

Rev. 01/11
-3.15- MFX
The SEC MENU allows the user to make password revisions, reset
the flow totalizer and reset the transmitter microprocessor.
TOT RES
NO
YES
Select YES to reset the Positive, Negative and Net flow totalizer/
accumulator to Zero.
SYS RSET
NO
YES
Select YES to initiate a microprocessor reset. All system
configurations and totalizer values will be maintained.
CH PSWD? -- Change the Security Password
0-9999
By changing the Security Password from 0 to some other value (any
value between 1-9999), configuration parameters will not be
accessible without first entering that value when prompted. If the
value is left at 0, no security is invoked and unauthorized changes
could be made.
SIG STR -- Signal Strength
This feature is not activated on the MFX flow meter product.
SIG C-OF -- Signal Strength Cutoff
This feature is not activated on the MFX flow meter product.
PART 3 - KEYPAD CONFIGURATION
3. SECURITY MENU
Totalizer
RESET
Change
Password
System RESET
Signal
Strength
Signal
Strength
Cutoff
4. SERVICE MENU