Communications, Control (front) panel, Electrical – Datamax-O'Neil S-Class User Guide User Manual
Page 66: Environmental, Interface, Baud speed, Handshaking, Xon/xoff, cts, dtr, Parity, Even, odd, or none
58
S-Class
Communications
Interface
USB, RS-232 (DB-9), and IEEE 1284
Compliant Centronics Parallel
Baud Speed
600 to 38,400 bits per second (BPS)
Handshaking
Xon/Xoff, CTS, DTR
Parity
Even, Odd, or None
Stop Bits
1 or 2
Data Bits
7 or 8
Control (Front) Panel
Buttons:
Dual Purpose: Pause/F1; Feed/F2; and Test/F3
Indicators:
Power, Fault and On-Line.
Potentiometer:
0-20 darkness settings
Electrical
Grounding:
Unit must be connected to a properly
grounded receptacle.
AC Input Voltage
90 – 132 or 180 – 264 VAC @ 47–63 Hz,
auto-ranging.
Environmental
Dust: Non-conducting,
non-corrosive
Electromagnetic Radiation:
Moderate RF fields can be tolerated
Operating Temperature
40
F to 100 F (4 C to 38 C)
Humidity
10%
95% non-condensing
- MF8I 270 User Guide (20 pages)
- MF8I Installation Guide (18 pages)
- MF8I Truck Mount Cable (2 pages)
- MF8I Locking Mounting Bracket (2 pages)
- MF8I Economy Mounting Bracket (2 pages)
- MF8I AN-15 (Line Printer and Easy Print Modes) (7 pages)
- MF8I AN-16 (Single Byte Character Set Font File Format) (8 pages)
- MF8I Quick Reference Programming Guide (72 pages)
- MF8I Configuration Program Installation (1 page)
- MF8I Bluetooth Management Component for Wavelink Avalanche (10 pages)
- A-Class Mark II Operator’s Manual (160 pages)
- A-Class Mark II Installation (2 pages)
- A-Class Mark II DMXrfNetIII (16 pages)
- A-Class Mark II DMXrfNetII (16 pages)
- A-Class Mark II RFID Quick Start Guide (6 pages)
- A-Class Mark II Programmer’s Manual (334 pages)
- ANDES 3 User Guide (32 pages)
- ANDES 3 Quick Start Guide (2 pages)
- ANDES Series Programmer’s Manual (67 pages)
- APEX 2 User Guide (28 pages)
- APEX 2 Quick Start Guide (2 pages)
- APEX 3 User Guide (27 pages)
- APEX 3 Quick Start Guide (2 pages)
- APEX 4 User Guide (30 pages)
- APEX 4 Quick Start Guide (2 pages)
- E-Class Mark III Operator’s Manual (90 pages)
- E-Class Mark III 4xxxxxxx Operator’s Manual (58 pages)
- E-Class Mark III 3xxxxxxx Operator’s Manual (58 pages)
- E-Class Mark III Paper Menu (7 pages)
- E-Class Mark III DPL Programmer’s Manual (296 pages)
- E-Class Mark III Printhead Bracket and Screw Upgrade (11 pages)
- H-Class Operator’s Manual (180 pages)
- Static brush (2 pages)
- H-Class Media Retainer (1 page)
- H-Class Thermal Transfer Option (12 pages)
- H-Class RFID Option (8 pages)
- H-Class Powered Internal Rewind Option (10 pages)
- H-Class Internal Rewind Option (6 pages)
- H-Class Present Sensor Option (8 pages)
- H-Class Peel & Present Option (8 pages)
- H-Class Linear Scanner Option (26 pages)
- H-Class HD Peel & Present Option (10 pages)
- H-Class HD Cutter Option (12 pages)
- H-Class GPIO Option (14 pages)
- H-Class Cutter Option (10 pages)