Datamax-O'Neil S-Class User Guide - Manual (Page 11)

S-Class 3
1.0.2 Optional Features
Many optional features are available for this printer:

Cutter and Tray (ST Models only)
This device automatically cuts ticket stock. Stock thickness can range
from .0025 inch (.06 mm) up to .008 inch (.2 mm). A tray, capable of
stacking a minimum of 100, 3.5-inch (88.9 mm) wide tickets, collects the
cut tickets. Order this feature when placing your printer order.
 External Ethernet Connectivity (uses printer’s parallel port)
A print server (the DMX100) that is an external Network Interface
Controller (NIC) to provide Ethernet
connectivity.
 Print Side Media Sensor (ST Models only)
This option allows the printer to sense TOF marks that are present on the
same side of the media in which printing will occur.

Roll Hanger (ST Models only)
This mounting option allows the printer to use rolled ticket stock with a
maximum 7-inch outer diameter (177.8 mm) on 2-inch (50.8 mm)
diameter core. Order part number 12-2978-01.