Datamax-O'Neil S-Class User Guide - Manual (Page 46)

38 S-Class
Operational Database: ST/SV-3306 Models
Parameter Description Settings
Stock ID Stock ID number 0-9 (see Section 4.1)
Label Width Width of the ticket stock used for
printing.
1.81 inches (46.0 mm)
1.92 inches (48.8 mm)
2.03 inches (51.6 mm)
2.14 inches (54.4 mm)
2.24 inches (56.9 mm)
2.35 inches (59.7 mm)
2.46 inches (62.5 mm)
2.56 inches (65.0 mm)
2.67 inches (67.8 mm)
2.88 inches (73.2 mm)
2.99 inches (75.9 mm)
3.10 inches (78.7 mm)
3.20 inches (81.3 mm)
Parser Mode Sets the emulation of the printer Auto, DTPL or DPL
Print Speed* Speed during printing 2-6 IPS
Slew Speed* Speed during feeding 2-6 IPS
Backup Speed* Speed during backup 3-5 IPS
Baud Rate Serial communication speed 600, 1200, 2400, 4800, 9600,
19.2K, 38.4K
Word Length Communicated word length 7-bit word (even parity)
8-bit word (no parity)
Cutter Equip Presence of the optional cutter will
be sensed automatically.
Auto, No, Yes
Row Adjust** Horizontal adjustment of the point
where printing begins.
-2.55 – 2.55 inches
(-64.8 mm – 64.8 mm)
Col Adjust** Vertical adjustment of the point
where printing begins.
-2.55 – 2.55 inches
(-64.8 mm – 64.8 mm)
Vert Adjust** Adjusts the number of formatted
dots in the vertical direction
0 – 20
Dots Per Inch
SOP Adjust Start of Print Position Adjustment
(see Section 4.2)
0 – 10.00 inches
(0 – 254 mm)
C/T Adjust Cut/Tear Position Adjustment (see
Section 4.2)
0 – 10.00 inches
(0 – 254 mm)
TOF Sense Selects the method for sensing the
ticket Top Of Form
Reflective, Continuous
Present DLY Delay - to stop the printer from
backing up the tickets when
printing multiple tickets.
0 – 75 sec in 5sec increments
Delays the presentation of the last
ticket printed for the specified time
period.
No Reprint When a fault condition is detected,
printing stops and the FAULT light
turns on. After the problem is
corrected, the FEED Key must be
pressed to clear the fault. The label
in process is not reprinted.
Yes or No
*Rates given in Inches Per Second.
** Valid in the DTPL Parser Mode only.