ALLIED Vision Technologies Bonito CL-400 200 fps - Manual (Page 68)

Parameters and commands
Bonito Technical Manual V2.3.0
68
Example 1 s=29
(0x29 = bx101001), sets the bit field to „0 0 1 - 1 0 0 1“
• Sets the baud rate to 57,600 Baud (weight = 9)
• Activates second channel via Camera Link connector O2 (weight = 20)
• Each character received from the host is echoed back to it (weight = 0)
Example 2 s=16
(0x16 = bx10110), sets the bit field to „0 0 1 - 0 1 1 0“
• Sets the baud rate to 9,600 Baud (weight = 6)
• Activates second channel via Camera Link connector O2 (weight = 20)
• Each character received from the host is echoed back to it (weight = 0)
Example 3 s=AA
(0xAA = bx10101010), sets the bit field to „1 0 1 - 1 0 1 0“
• Sets the baud rate to 115,200 Baud (weight = A)
• Activates second channel via Camera Link connector O2 (weight = 20)
• No echo (weight = 80)
Show Help text (?)
The command ? shows an embedded command reference text at the serial ter-
minal. It lists a short description for each command available in the firmware.
Echo mode
0xx-xxxx Each character received from the host is
echoed back to it.
0
1xx-xxxx No echo 80
Bit values Settings Weight
(hexadecimal)
Table 28: Baud rate: hexadecimal weights for each setting