ALLIED Vision Technologies Bonito CL-400 200 fps - Manual (Page 30)

Camera Link interface (01-04 or CL1, CL2)
Bonito Technical Manual V2.3.0
30
Each channel delivers ten Camera Link ports labelled A to J. Every port has eight
bits and is assigned to a corresponding sensor tap that outputs specific pixel
columns of the image. Consequently, up to 2 x 10 = 20 simultaneous pixels are
transferred to the frame grabber(s) in parallel per Camera Link clock cycle.
The following illustrations depict the bit and wire assignments at the Camera
Link connectors:
Figure 13: Camera link connector: 10-tap pin assignment (O2/O4 or CL1 connector)