ALLIED Vision Technologies Bonito CL-400 200 fps - Manual (Page 37)

Camera Link interface (01-04 or CL1, CL2)
Bonito Technical Manual V2.3.0
37
Dual channel, reduced line length
The charts below illustrate the Camera Link timing for dual channel mode (com-
patibility mode with reduced line length,
S=3), in continuous mode (M=0). The
frame gap may vary in other trigger modes. Additionally, the number of active
lines per frame can be configured by the user (parameter
N).
Note

The diagrams displayed are not applicable for the Bonito CL-
400B/C 200fps cameras.
Figure 21: Line timing for dual channel mode (compatibility mode with reduced line length, S=3)
Figure 22: Frame timing for dual channel mode (compatibility mode with reduced line length, S=3)