ALLIED Vision Technologies Bonito CL-400 200 fps - Manual (Page 65)

Parameters and commands
Bonito Technical Manual V2.3.0
65
T=03
U=00
W=18
s=2A
>
Serial number (a)
The camera’s serial number is stored as 16-bit value. Use the command a to
read it.
Product variant code (b)
The product variant code is a 16-bit number unambiguously identifying the
camera variant. Use command b to read it.
Note

The serial interfaces are not reinitialized by Z=1. The baud
rate does not change until re-start of the camera or explicitly
writing a new value to the serial interface configuration
parameter
s.
b Article number Camera variant
0000 1064000 CMC-4000 / C-Mount
0001 1064001 CMC-4000 / F-Mount
0002 1064002 CMC-4000 / EF-Mount
0010 1064010 CMC-4000C / C-Mount
0011 1064011 CMC-4000C / F-Mount
0012 1064012 CMC-4000C / EF-Mount
4000 4064000 Bonito CL-400B
4001 4064001 Bonito CL-400B F-Mount
4002 4064002 Bonito CL-400B EF-Mount
4010 4064010 Bonito CL-400C
4011 4064011 Bonito CL-400C F-Mount
4012 4064012 Bonito CL-400C EF-Mount
4020 4064020 Bonito CL-400B 200fps
4021 4064021 Bonito CL-400B F-Mount 200fps
Table 25: Product variant code (b)