ALLIED Vision Technologies Bonito CL-400 200 fps - Manual (Page 25)

Camera interfaces
Bonito Technical Manual V2.3.0
25
Camera I/O connector pin assignment
(15-pin D-sub connector)
This connector is intended for supplying power as well as external input/output
signals.
Power supply (pin 1-4)
The camera requires 12 V DC (+5%, -10%) at a continuous maximum of 0.4 A.
We recommend to use all pins for power supply, 1 and 2 as well as 3 and 4).
Figure 9: Camera I/O connector pin assignment
Pin Signal Direction Level Description RS232
9-pin
D-sub
1 External Power +12 V DC
(+5%, to 10%),
0.35 A (4.2 W),
max. 0.36 A Power supply
2
3 External GND 5 (GND)
4
5 Reserve
6 Sync Out RS232 Synchronization
signal
7 RXD In RS232 3 (TXD)
8 TXD Out RS232 Serial control 2 (RXD)
9 Reserve
10 Trigger input - Optocoupler
input, 5 V to 12 V,
max. 15 mA External trigger
signal
11 +
12 Exposure output - Optocoupler
output,
open collector,
30 V, max. 150 mW Active exposure
signal
13 +
14 Reserve
15 Reserve