ALLIED Vision Technologies Bonito CL-400 200 fps - Manual (Page 13)

Specifications
Bonito Technical Manual V2.3.0
13
Specifications
Bonito CL-400B/C, Bonito CL-400B/C 200fps
Note

The correct polarity of the 12 V supply voltage must be assured.
The warranty becomes void in case of unauthorized tampering
or any modifications not approved by Allied Vision Technolo-
gies.
Feature Specification
Sensor Type 4/3, CMOS progressive with global shutter
Effective chip size 16.24 mm (H) x 12.08 mm (V)
Cell size 7 μm x 7 μm
Resolution (max.) 2320 (H) x 1726 (V)
Lens mount C-Mount, Canon EF-Mount, Nikon F-Mount
Frame rate Bonito CL-400B/C: up to 386 fps, higher rates with smaller ROI
Bonito CL-400B/C 200fps: with one Camera Link channel: up to 193 fps
ADC 10 bit
Exposure time 1.5 μs to approx. 1 s
Operating temperature 0 °C to +45 °C
Storage temperature -30 °C to +70 °C
Humidity
(operating and storage) max. 95% RH, non-condensing
Power supply 12 V DC, -10% to +5%, 0.35 A (4.2 W), max. 0.4 A
Digital output Bonito CL-400B/C: 2 x 10-tap Camera Link Full+, 80 bits, 80 MHz, 8 bits
per pixel
Bonito CL-400B/C 200fps: 1 x 10-tap Camera Link Full+, 80 bits,
80 MHz, 8 bits per pixel
Camera control CC1: trigger input, CC2: reserve
Serial control Serial via Camera Link or RS232 via control connector
Optocoupler inputs 1 external trigger input
Optocoupler outputs 1 exposure active signal
Table 3: Specification Bonito CL-400B/C, Bonito CL-400B/C 200fps