DE-STA-CO IM-pAC AC Drive Getting Started Guide User Manual
Page 3

IM-pAC Getting Started Guide
3
Issue Number: 5
www.camcoindex.com | www.destaco.com
Contents
Read Me First Instructions .................................................6
Motor Jumper Configuration for 1/3 hp and 1.00 hp motors ...................7
Wiring Power and Switches to Drive .......................................................7
Emergency Stop Safety ...........................................................................9
Warranty and Return Policy ....................................................................9
Indexer drive shown in middle of dwell position diagram. .......................9
Drive default parameter list for a single preset speed application .........10
Drive parameter list for using a potentiometer to control speed ............12
Drive parameter list for using a potentiometer to control speed with a
proximity switch for cycling ....................................................................14
Drive parameter list for using a potentiometer and switch selected
presets to control speed ........................................................................17
Drive wiring for using a potentiometer and switch selected presets to
control speed .........................................................................................19
Drive parameter list for using a PLC to control speed ...........................20
Drive wiring for a PLC to control speed .................................................21
How to configure the IM-pAC drive to trip for a current overload. .........22
Drive parameter list for a motor reversing application ...........................24
Drive wiring for a motor reversing application. ......................................27
Drive parameter list for a 24Vdc brake motor ........................................28
Drive wiring for a 24Vdc brake motor ....................................................30
Drive and Options part numbers ...........................................................31
Safety Information .............................................................32
Warnings, Cautions and Notes ..............................................................32
Electrical Safety - general warning ........................................................32
System design and safety of personnel ................................................32
Environmental Limits .............................................................................32
Compliance and regulations ..................................................................33
Adjusting parameters ............................................................................33
2.9