B&K Precision 4052-4055 - Manual - Manual (Page 21)

21
3.2 Selecting a Channel
The 4050 series function/arbitrary waveform generators have dual channel outputs. They
can be operated independently or in sync with each other. To select between channel 1 and
2 and view/change their parameters, toggle the key.
When Channel 1 is selected, the display will look like below:
When Channel 2 is selected, the display will look like below:
3.3 Configure Waveform Output
Configure Waveform Shape
The instrument can generate many standard as well as arbitrary waveforms. There are
waveform keys on the front panel that will switch between different waveform shape to
output. Below is a table of waveforms and the corresponding keys to press to generate
those waveforms.
CH1/2