Autel MaxiDAS DS708 - Manual (Page 61)

55
Figure 3.51: OBD II-I/M Readiness Screen
7. O2 Mon. Test
The O2 Monitor Test function allows retrieval and viewing of O2 sensor
monitor test results for the most recently performed tests from the vehicle's
on-board computer.
The O2 Monitor Test function is not supported by vehicles which
communicate using a controller area network (CAN). For O2 Monitor Test
results of CAN-equipped vehicles, please refer to “On-Board Mon. Test”.
The data can be saved to the SD card, or be printed.
Figure 3.52: OBD II-O2 Mon. Test Screen
8. On-Board Mon. Test
The On-Board Monitor Test function allows you to view the results of
On-Board Monitor Tests. The tests are useful after servicing or after erasing
a vehicle’s control module memory.