Autel MaxiDAS DS708 - Manual (Page 10)

4
1.2.3. DLC Cables, Adapters and other Accessories
1. DLC Cables
The DS708 unit can be powered through the DLC cable when connected to
an OBD-II vehicle. The DLC cable connects the scan tool to the vehicle’s
data link connector (DLC). An optional extension cable may also be used.
Figure 1.6: DLC Cable
2. OBD I Adapters
The OBD I adapters are for Non-OBD II vehicles. The adapters used depend
on the type of vehicle make being tested. The most common adapters are
shown below.
OBD-16 Honda-3 Nissan-14
Toyota-23 Toyota-17 Mazda-17