Autel MaxiDAS DS708 - Manual (Page 58)

52

I/M Readiness

O2 Mon. Test

On-Board Mon. Test

Component Test

Vehicle Info.

Modules Present

DTC Lookup
NOTE: Some functions are supported only on certain vehicle makes.
3.6.2. Functions Description
1. System Status
The System Status function allows you to view system status of the vehicle
being tested.
Figure 3.47: OBD II-System Status Screen
2. Read Codes
Reading Codes can be done with the key on engine off (KOEO) or with the
key on engine running (KOER). This function allows you to view the stored
codes and pending codes detected.
The data can be saved to the SD card, or be printed.