Autel MaxiDAS DS708 - Manual (Page 21)

15
2. Getting Started
2.1. Power up the Scan Tool
Before using the scan tool, you must provide power to the scan tool. There
are two methods for providing power to the scan tool:

AC/DC external power adapter

Cable connection to vehicle
During vehicle testing, power for the scan tool is usually provided through
the vehicle cable connection. When the scan tool is not connected to a
vehicle, the scan tool can be powered with an AC/DC external power
adapter.
Figure 2.1: Power Adapter Connection to the Scan Tool
2.2. Adjust Default Settings
Use the Setup/Help functions to adjust default settings for the scan tool as
follows:
1. Power up the scan tool, press the On/Off button to turn the scan tool on,
and wait for the Home Screen to appear.
2. Click on Setup/Help to display the Setup/Help screen as shown below: