Autel MaxiDAS DS708 - Manual (Page 6)


Put blocks in front of the drive wheels and never leave the vehicle
unattended while running tests.

Use extreme caution when working around the ignition coil, distributor cap,
ignition wires and spark plugs. These components create hazardous voltages
when the engine is running.

Keep a fire extinguisher suitable for gasoline/ chemical/ electrical fires
nearby.
 Don’t connect or disconnect any test equipment while the ignition is on or
the engine is running.

Keep the scan tool dry, clean, free from oil/water or grease. Use a mild
detergent on a clean cloth to clean the outside of the scan tool, when
necessary.

Do not drive the vehicle and operate the scan tool at the same time. Any
distractions may cause an accident.

Refer to the service manual for the vehicle being serviced and adhere to all
diagnostic procedures and precautions. Failure to do so could result in
personal injury or otherwise unneeded repair.

To avoid damaging the scan tool or generating false data, make sure the
vehicle battery is fully charged and the connection to the vehicle DLC is
clean and secure.

Do not place the scan tool on the distributor of a vehicle. Strong
electro-magnetic interference can damage the scan tool.