Atec Agilent-E5071B - Manual (Page 32)

32
Table 3-2 Option E5092A-020 port performance (continued)
Description Specification Typical
Load match (common port)
SPDT switch 1
50 MHz to 2 GHz 16 dB
2 GHz to 4 GHz 11 dB
4 GHz to 8 GHz 8 dB
8 GHz to 10 GHz 7 dB
10 GHz to 20 GHz 4 dB
SP4T switch 2
50 MHz to 1.3 GHz 16 dB
1.3 GHz to 4 GHz 11 dB
4 GHz to 8 GHz 8 dB
8 GHz to 10 GHz 7 dB
10 GHz to 20 GHz 4 dB
Insertion loss
SPDT switch 1
50 MHz to 100 MHz 4 dB
100 MHz to 2 GHz 3.5 dB
2 GHz to 3 GHz 4.5 dB
3 GHz to 4 GHz 5 dB
4 GHz to 6 GHz 5.5 dB
6 GHz to 8 GHz 7 dB
8 GHz to 10 GHz 8 dB
10 GHz to 14 GHz 8.5 dB
14 GHz to 18 GHz 10 dB
18 GHz to 20 GHz 11.5 dB
SP4T switch 2
50 to 100 MHz 4 dB
100 MHz to 2 GHz 3.5 dB
2 GHz to 3 GHz 4.5 dB
3 GHz to 4 GHz 5.5 dB
4 GHz to 6 GHz 6 dB
6 GHz to 8 GHz 7.5 dB
8 GHz to 10 GHz 8.5 dB
10 GHz to 14 GHz 9.5 dB
14 GHz to 18 GHz 10.5 dB
18 GHz to 20 GHz 12 dB
Stability
50 MHz to 6 GHz 0.003 dB/°C
6 GHz to 20 GHz 0.01 dB/°C (Stability per switch)
Isolation 3
50 MHz to 500 MHz 65 dB
500 MHz to 1 GHz 80 dB
1 GHz to 2 GHz 85 dB
2 GHz to 6 GHz 90 dB
6 GHz to 10 GHz 85 dB
10 GHz to 18 GHz 75 dB
18 GHz to 20 GHz 65 dB (Over arbitrarily test ports)
1 SPDT: Single-pole-double-throw switches. Applies to SW5, SW6, SW7, SW8, SW9 and SW10 in the E5092A. (See Figure 3-5.)
2 SP4T: Single-pole-four-throw switches. Applies to SW1, SW2, SW3 and SW4 in the E5092A. (See Figure 3-5.)
3 This specification is defined when all ports are terminated with a 50 ohm load.