Atec Agilent-E5071B - Manual (Page 11)

11
Table 1-10 Test port input levels
Description Specification Supplemental information
Maximum test port input level
300 kHz to 3 GHz +10 dBm
3 GHz to 4.25 GHz +9 dBm
3 GHz to 6 GHz +7 dBm
6 GHz to 8.5 GHz +5 dBm
Damage level
300 kHz to 8.5 GHz RF +20 dBm
±10 VDC (source attenuator = 0 dB)
±25 VDC (source attenuator = 5 dB or more, typical)
Crosstalk 1
3 MHz to 3 GHz -120 dB
3 GHz to 6 GHz -109 dB
6 GHz to 7.5 GHz -99 dB
7.5 GHz to 8.5 GHz -89 dB
Table 1-11 Test port input (trace noise 2 )
Description Specification Supplemental information
Trace noise magnitude
300 kHz to 3 MHz 5 mdB rms (typical)
(source power level = +10 dBm) 8 mdB rms (high temperature mode: ON, typical)
3 MHz to 3 GHz 1 mdB rms (23°C ±5°C) 4 mdB rms
(source power level = +10 dBm) (high temperature mode: ON, typical)
3 GHz to 4.25 GHz 1.2 mdB rms (23°C ±5°C) 4.8 mdB rms
(source power level = +9 dBm) (high temperature mode: ON, typical)
4.25 GHz to 6 GHz 3.6 mdB rms (23°C ±5°C) 7.2 mdB rms
(source power level = +7 dBm) (high temperature mode: ON, typical)
6 GHz to 7.5 GHz 3.6 mdB rms (23°C ±5°C) 7.2 mdB rms
(source power level = +5 dBm) (high temperature mode: ON, typical)
7.5 GHz to 8.5 GHz 6 mdB rms (23°C ±5°C) 9.6 mdB rms
(source power level = +5 dBm) (high temperature mode: ON, typical)
Trace noise phase
300 kHz to 3 MHz 0.035° rms (23°C ±5°C, typical)
(source power level = +10 dBm) 0.05° rms (high temperature mode: ON, typical)
3 MHz to 3 GHz 0.007° rms (23°C ±5°C, typical)
(source power level = +10 dBm) 0.02° rms (high temperature mode: ON, typical)
3 GHz to 4.25 GHz 0.008° rms (23°C ±5°C, typical)
(source power level = +9 dBm) 0.024° rms (high temperature mode: ON, typical)
4.25 GHz to 6 GHz 0.025° rms (23°C ±5°C, typical)
(source power level = +7 dBm) 0.042° rms (high temperature mode: ON, typical)
6 GHz to 7.5 GHz 0.025° rms (23°C ±5°C, typical)
(source power level = +5 dBm) 0.042° rms (high temperature mode: ON, typical)
7.5 GHz to 8.5 GHz 0.042° rms (23°C ±5°C, typical)
(source power level = +5 dBm) 0.06° rms (high temperature mode: ON, typical)
Test port input
1 Response calibration not omitted.
2 Trace noise is defined as a ratio measurement of a through, at IF bandwidth = 3 kHz.