Atec Agilent-E5071B - Manual (Page 21)

21
Measurement capabilities
Number of measurement channels Up to 16 independent measurement channels. A measurement channel is coupled
to stimulus response settings including frequency, IF bandwidth, power level,
and number of points.
Number of display windows Each measurement channel has a display window. Up to 16 display windows (channels)
can be displayed.
Number of traces Six display modes (selectable):
16 data traces and 16 memory traces per channel at 4-channel mode
9 data traces and 9 memory traces per channel at 9-channel mode
6 data traces and 6 memory traces per channel at 12-channel mode
4 data traces and 4 memory traces per channel at 16-channel mode
4 data traces and 4 memory traces per channel at 2-channel mode
4 data traces and 4 memory traces per channel at 1-channel mode
Measurement choices Option E5070B/E5071B-214: S
11
, S
21
, S
12
, S
22
Option E5070B/E5071B-314: S
11
, S
21
, S
31
, S
12
, S
22
, S
32
, S
13
, S
23
, S
33
,
Mixed-mode S-parameters, balanced parameters, CMRR
Option E5070B/E5071B-414: S
11
, S
21
, S
31
, S
41
, S
12
, S
22
, S
32
, S
42
, S
13
,
S
23
, S
33
, S
43
, S
14
, S
24
, S
34
, S
44
, mixed mode S-parameters, balanced parameters, CMRR
Option E5070B/E5071B-214 and 008: S
11
, S
21
, S
12
, S
22
, absolute parameters.
Option E5070B/E5071B-314 and 008: S
11
, S
21
, S
31
, S
12
, S
22
, S
32
, S
13
, S
23
, S
33
,
Mixed-mode S-parameters, balanced parameters, CMRRA, absolute parameters.
Option E5070B/E5071B-414 and 008: S
11
, S
21
, S
31
, S
41
, S
12
, S
22
, S
32
, S
42
, S
13
, S
23
,
S
33
, S
43
, S
14
, S
24
, S
34
, S
44
, mixed mode S-parameters, balanced parameters, CMRR,
absolute parameters.
Measurement parameter conversion Available to convert S-parameters into reflection impedance, transmission impedance
(series), transmission impedance (shunt), reflection admittance, transmission
admittance (series), transmission admittance (shunt), and 1/S.
Data formats Log magnitude, linear magnitude, phase, extended phase, positive phase,
group delay, SWR, real, imaginary, Smith chart, polar.
Data markers 10 independent markers per trace. Reference marker available
for delta marker operation. Smith chart format includes 5 marker formats:
linear magnitude/phase, log magnitude/phase, real/imaginary,
R + jX, and G + jB. Polar chart format includes 3 marker formats:
linear magnitude/phase, log magnitude/phase, and real/imaginary.
Marker functions
Marker search Max value, min value, peak, peak left, peak right, target, target left, target right,
bandwidth parameters with user-defined bandwidth values.
Marker-to functions Set start, stop, center to active marker stimulus value; set reference to active
marker response value; set electrical delay to group delay at active marker.
Search range User definable.
Tracking Performs marker search continuously or on demand.
Time domain functions 1
Transformation Selectable transformation type from bandpass, lowpass impulse, lowpass step.
Selectable window from maximum, normal and minimum.
Gated functions Selectable gated filter type from bandpass, notch.
Selectable gate shape from maximum, normal and wide.
1 Option E5070B-010 or E5071B-010 is required.