beautypg.com

Sentinel mode display 1, Tank or line testing display 1, Tank & line display notes: 1 – Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Operators Guide Rev. D User Manual

Page 13: Menu keys

background image

Console – Basic Operation

Page

1 - 3

1

Sentinel Mode Display

Under the word TANK, SENTINEL is alternately displayed with OKAY or ALARM when the
Sentinel mode is running. Sentinel-mode is programmed to run after business hours and
will monitor for product thefts and gross tank leaks.

Tank or Line Testing Display

Under the word TANK or LINE, TESTING is alternately displayed with OKAY or ALARM
when leak test(s) are running. Tests can either be started manually, or scheduled (setup)
to run at certain times of the month, week, or day. A tank leak test estimate report can be
printed by using the

REPORT

key. A leak test status can be displayed, and a leak test can

be (aborted), by using the

TEST

key.

Tank & Line

Display Notes:

a.) The tank-status display and any tank-related menus or reports do not appear unless

the number of tanks are setup / programmed for 1 or more tanks. A Leak Detection
System (tanks set to Ø) can monitor leak detection sensors, but does not monitor in-
tank product levels.

b.) The line-status display, and any line-related menus or reports will not appear unless

INCON Line Leak Detectors are connected to the TS-LLDI interface terminals, and the
number of lines are setup (programmed) for 1 or more lines.

Menu keys

(

M1

thru

M4

) ...see graphic above

Menu keys

are used to: make menu selections (see the

ALARM

key) and to display

information (see above... press a

Menu key

to display current alarms). Menu keys can

control the cursor, or delete a character when a number or letter input is required from the
keypad {

M4

can backspace / delete a input character ( xxx_

ï

),

M1

moves the cursor

left and

M2

moves the cursor right }.

SELECT LEAK TEST OPTION
STATUS

START

ABORT

See Tank and Line
Display Notes
a & b (below)

See Tank and Line
Display Notes
a & b (below)

SYSTEM

TANK

SENSOR

LINE

OKAY

SENTINEL

OKAY

TESTING

M1

M2

M3

M4

LEFT

RIGHT

SYSTEM

TANK

SENSOR

LINE

WARNING

TESTING

ALARM

OKAY

M1

M2

M3

M4

LEFT

RIGHT