Elmo Rietschle 2FC4...-1CB - Manual (Page 68)

9 Technical data
610.00260.40.000 · 05.2014 68 / 74 © Gardner Denver Deutschland GmbH
Derating due to the clock frequency
The following illustration shows the output current as a function of the clock fre-
quency. In order to limit the heat losses in the drive controller, the output current
must be reduced.
Note: There is no automatic reduction of the clock frequency!
The max. output values can be defined, based on the following characteristic
curve.
Derating of the maximum output current due to the clock frequency
9.2.3