Elmo Rietschle 2FC4...-1CB - Manual (Page 28)

5 Installation
610.00260.40.000 · 05.2014 28 / 74 © Gardner Denver Deutschland GmbH
Mounting the adapter plate to a wall
WARNING
Risk of injury due to incorrect assembly!
 The drive controller may not be installed without an adapter plate.
5. Find a location that corresponds to the required ambient conditions, as de-
scribed in the "Installation requirements" section.
6. In order to achieve optimum self-convection of the drive controller, it must be
ensured during assembly that the (EMC) fitting points upward.
7. Without additional ventilation of the drive controller, only vertical mounting is
allowed.