Elmo Rietschle 2FC4...-1CB - Manual (Page 27)

Installation 5
© Gardner Denver Deutschland GmbH 27 / 74 05.2014 · 610.00260.40.000
Mechanical installation
Wiring at the motor connection box
1. Open the motor connection box.
NOTICE
Depending on the desired motor voltage, star or delta connection should be
made in the motor connection box.
2. When connecting the shielded motor cable to the motor connection box, use
suitable EMC fittings and ensure proper (large surface) contact with the
shield.
3. Connecting a PE connection to the motor connection box is mandatory.
4. Reconnect the motor connection box.
5.4.2