Elmo Rietschle 2FC4...-1CB - Manual (Page 16)

5 Installation
610.00260.40.000 · 05.2014 16 / 74 © Gardner Denver Deutschland GmbH
Suitable installation location for the motor-integrated drive
control
 Ensure that the motor with a motor-integrated drive control is only installed
and operated if aligned as shown in the following diagram.
Motor installation location/permitted alignments
Basic connection variations
Star or delta connection with the drive controller integrated in the motor
NOTICE
Risk of damage to the drive controller!
When connecting the drive controller, the correct phase sequence must be
adhered to; otherwise, the motor can be overloaded.
 Thus, the correct phase sequence should be ensured when connecting the
motor.
With the supplied installation material, wire-end sleeves and cable lugs can be
connected. The connection options are shown in Figure 4.
5.2.2
5.2.3