Elmo Rietschle 2FC4...-1CB - Manual (Page 60)

7 Parameters
610.00260.40.000 · 05.2014 60 / 74 © Gardner Denver Deutschland GmbH
34.226 Starting current Unit: %
Relationship to
parameter:
34.227 Parameter HB:
S. xy
Transfer
status:
2
min: 5 Intrinsic value
(to be en-
tered!)
max: 1000
Def: 25
Only for synchronous motors.
The flow which is set in the motor prior to its start can be ad-
justed here. Value in % of the rated motor current.
34.227 Initialisation time Unit: s
Relationship to
parameter:
34.226 Parameter HB:
S. xy
Transfer
status:
2
min: 0 Intrinsic value
(to be en-
tered!)
max: 100
Def: 0,25
Only for synchronous motors.
The time in which the starting current is 34,226 is applied can be
set here.
34.228–
34.230
Start-up behaviour Unit: Integer
Relationship to
parameter: Parameter HB:
S. xy
Transfer
status:
2
min: 0 Intrinsic value
(to be en-
tered!)
max: 1
Def: 0
Only for synchronous motors.
Larger starting torques can be achieved by changing the start-
up procedure to the "controlled" mode.
0 = regulated, the inverter switches directly to the control mode
after the setting phase.
1 = controlled, following the setting phase, the field of rotation is
increased to the starting frequency 34,230 controlled with the
start-up ramp 34,229, then it is switched to the regulation mode.