Cables, Preliminar y – Extron Electronics System 5 IP Series User Guide User Manual
Page 113
A-7
System 5 IP Switchers • Reference Material
PRELIMINAR
Y
Control accessories
Part number
IR Emitter
19-823-01
IR Broadcaster
60-272-01
Current/display power sensor
60-271-01
IR Link IR signal repeater (gray, black, white)
60-404-01, -02, -03
IR 402 remote control (1)
70-207-01
SCP 150 (gray, black, white)
60-495-01, -02, -03
SCP 150 AAP (gray, black, white)
60-496-01, -02, -03
IRCM-VCR (gray, black, white)
70-148-01, -02, -03
IRCM-DVD (gray, black, white)
70-149-01, -02, -03
IRCM-DVD+ (gray, black, white)
70-179-01, -02, -03
IRCM-Tape (gray, black, white)
70-180-01, -02, -03
IRCM-DV+ (gray, black, white)
70-220-01, -02, -03
RCM-SC (gray, black, white)
70-183-01, -02, -03
RCM-SCLT (gray, black, white)
70-184-01, -02, -03
ACM-Tone (gray, black, white)
70-181-01, -02, -03
ACM-Level (gray, black, white)
70-182-01, -02, -03
CM-3BLB (black, white, RAL9010 white)
70-493-02, -03, -05
CM-9BLB (black, white, RAL9010 white)
70-494-02, -03, -05
CM-5BB (black, white, RAL9010 white, gray)
70-185-02, -03, -05, -01
CM-20BB (black, white, RAL9010 white, gray)
70-205-02, -03, -05, -01
Cables
These cables can be used for the RS-232 control connection between the switcher
and the projector:
Projector control cable
Part number
UC 50' (15 m), UC 100' (30 m), or UC 200' (61 m)
universal projector control cable
26-518-01, -02, -03
This cable is recommended for connecting a System 5 IP to an Extron MPS 112
Switcher and/or to an IR Link or control modules such as IRCM and RCMs:
CTL and CTLP (Comm-link) cable
Part number
50'/15 m, plenum
26-461-01
100'/30 m, plenum
26-461-02
200'/60 m, plenum
26-461-03
300'/90 m, plenum
26-461-05
400'/120 m, plenum
26-461-04
Bulk 500'/150 m, non-plenum
22-148-02
Bulk 1000'/300 m, non-plenum
22-148-03
Bulk 500'/150 m, plenum
22-119-02
Bulk 1000'/300 m, plenum
22-119-03