Extron Electronics System 5 IP Series User Guide - Manual (Page 101)

6-7 System 5 IP Switchers • Special Applications
14. If needed, add commands from the DVD-VCR driver to each press/release
action (1 and 2) for the Room 2 button. You might want to assign a DVD
command and a Play command to the first press/release and to assign a VCR
command and a Play command to the second press/release. For example:
a. Click Add below the Button Operations area at the bottom of the GC
window. The Add Button Operation window appears.
b. Select Driver as the operation type.
c. Select the port that sends commands to the DVD-VCR player (port A in this
example).
d. Select the
DVD-VCR
player’s
driver.
e. Select the
desired
command
from the list
of
commands
available in
the driver.
f. Click on the
buttons
indicating
when (press or release) and during which action (1 or 2) you want the
switcher to send that command to the DVD-VCR player.
g. Click OK.
h. Repeat steps14a through 14g as needed to associate other commands
with the presses and/or releases of the room button.
The result looks something like this: