Extron Electronics MVX VGA A User Guide - Manual (Page 79)

Programmer’s Guide, cont’d
MVX VGA A Matrix Switchers • Programmer’s Guide 4-10
PRELIMINAR
Y
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Lock (executive) modes
N See “Setting the front panel locks ( Executive modes)” in chapter 3, “Operation”, for more information on the Lock
modes.
Lock all front panel functions 1X Exe1
] Enable Lock mode 1.
Lock advanced front panel
functions 2X Exe2
] Enable Lock mode 2.
Unlock all front panel
functions 0X Exe0 ] Enable Lock mode 0.
View lock status X X*]
Resets
Reset global presets and names E
ZG
}
Zpg
] Clear all global presets and
their names.
Reset one global preset EX(
ZG
}
Zpg
X(]
Clear global preset
X(
.
Reset audio input levels E
ZA
}
Zpa
] Reset all audio input levels
(gain and attenuation) to 0 dB.
Rest audio output levels E
ZV
}
Zpv
] Reset all audio output
levels (volume) to 100% (no
attenuation).
Reset all mutes E
ZZ
}
Zpz
] Reset all video and audio
mutes.
Reset flash E
ZFFF
}
Zpf
] Reset flash memory (erase all
user-supplied files).
Reset whole switcher E
ZXXX
}
Zpx
] Clear all ties and presets,
reset all audio gains to 0 dB,
and reset volume to 100%.
Absolute reset E
ZQQQ
}
Zpq
] Similar to Reset whole
switcher
, plus set the IP
address to 192.168.254.254
and subnet mask to
255.255.000.000 (defaults).
View ties, gain, volume, mutes, and presets
View RGBHV output tie X#
&
X@]
Example: 5& 12
] Input 12 RGBHV is tied to
output 5.
View video output tie X#
%
X@]
Example: 7% 02
] Input 2 video is tied to output 7.
View audio output tie X#
$
X@]
Example: 3$ 06
] Input 6 audio is tied to output 3.
View input gain X@ G X$]
Example: 4G -02
] Gain for input 4 is -2 dB.
View output volume X@ V X&]
Example: 7V 55
] Volume for output 7 is 55%.
View output mutes E
VM
} X1)
1 ,
X1)
2 , ...
X1)
8
]
Each
X1)
response is the
mute status of an output,
starting from output 1.
Example: E
VM
}
02301000
] Output 2 audio is muted,
output 3 video and audio are
muted, and output 5 video is
muted. All other outputs are
unmuted.