Extron Electronics VN-Matrix 300 User Guide - Manual (Page 75)

VN-Matrix 300 • Technical Data 69
Network Port 2: SFP
Function: Port 2 is used for network connectivity and supports
10/100/1000BASE-LX (Gigabit Ethernet) optical and
10/100/1000BASE-TX (Gigabit Ethernet) copper
connections.
Connector type: SFP (mini-GBIC) GIGABIT slot for copper or Optical SFP
compatible transceivers.
Optical SFP compatible
transceivers: Dell / Finisar FTLF8519P2BNL Transceiver module
Optical wavelength: 850nm
Recommended cable: Ethernet 1000base-SX
Maximum transfer
distance: 550meters
Compliant Standard: IEEE802.3
Ethernet (MAC) address: Each address is unique and in the format 0:E0:AA:10: xx : yy
where:
yy is in the range 00 – FF
xx is in the range 00 – FF
For example: Port II: 00:E0:AA:10:10:18
IP address: Factory-set default is:
Port II: 192.168.1.12
User-definable via the serial interface.