beautypg.com

Filter settings, Alarms, Alarms page – Extron Electronics VN-Matrix 300 User Guide User Manual

Page 66

background image

VN-Matrix 300 • Alarms and SNMP

60

Alarms Page

Figure 45.

The Alarms screen enables a user to define and monitor system alarms.

Filter Settings

Figure 46.

Filter Settings Section

The Filter Settings section allows the default settings for each alarm type to be modified.

a

Alarm Type — Select the particular alarm that is to have its default setting changed.

b

Alarm Source — Select the device on which the alarm is to changed.

c

Alarm Severity — Set the alarm severity. Each alarm condition has a default severity

which may be overwritten using the filter controls. Note that the default setting is listed
in this drop down independently of any changes that have been made to the alarm
severity.

d

Alarm Reporting — Set the alarm to be either reporting or not reporting. Each alarm

condition has a default reporting setting. Note that the default setting is listed in this
drop down independently of any changes that have been made to the alarm reporting.