Hardware, Network port 1: rj45 – Extron Electronics VN-Matrix 300 User Guide User Manual
Page 74
VN-Matrix 300 • Technical Data
68
Regulatory compliance
Safety ...................................... CE, UL
EMI/EMC ................................. CE, EN60950-1
Warranty ........................................ 3 years parts and labor
NOTE: All nominal levels are at ±10%.
NOTE: Specifications are subject to change without notice.
Hardware
Network Port 1: RJ45
Function:
Port I is used for network connectivity and supports
10/100/1000BASE-T (Gigabit Ethernet) copper
connections.
Connector type:
Shielded RJ-45 Socket.
Pin-out details:
Data TX/RX
indicator
Network Status
indicator
Pin Function
Pin Function
1
TX_D1+ (TX+)
5
BI_D3–
2
TX_D1– (TX–)
6
RX_D2– (RX–)
3
RX_D2+ (RX+)
7
BI_D4+
4
BI_D3+
8
BI_D4–
Mating connector:
Shielded RJ-45 Plug.
Recommended cable:
CAT 5E or CAT 6 Shielded twisted pair (STP).
Maximum cable length:
100 meters (330 feet).
Comms standard:
10/100/1000BASE-T (Gigabit Ethernet)
Ethernet (MAC) address:
Each address is unique and in the format 0:E0:AA:10:
xx
:
yy
where:
yy
is in the range 00 – FF,
xx
is in the range 00 – FF
For example: Port I: 00:E0:AA:10:00:18
IP address:
Factory-set default is:
Port I: 192.168.0.1
User-definable via the serial interface.