Extron Electronics VN-Matrix 300 User Guide - Manual (Page 53)

VN-Matrix 300 • System Configuration 47
Stream Type —_rtp MULTICAST
A multicast UDP stream, used for best effort point to multi point delivery. Note that
this stream type is only available when a multicast stream has been configured at the
corresponding encoder.
Decoder — Enabling audio streams
Transport of the audio content (the audio stream) associated with the selected video stream
may be enabled by selecting the
Audio check box under the Audio heading.
Use the update button to apply the setting.
The selected audio stream will be listed adjacent to the audio heading in the bandwidth list.
Figure 33. Audio Stream in Bandwidth List
Decoder — Enabling FEC for audio streams
Forward error correction (FEC) for the selected audio stream may be enabled by selecting the
FEC check box under the FEC heading.
Select the the update button to apply the setting.
The associated FEC stream will be listed adjacent to the colfec and rowfec headings in the
bandwidth list.
Figure 34. FEC Stream
NOTES: • FEC data is only sent from an encoder when it is enabled for processing by a
decoder.
• FEC data is only sent for the audio stream.