Extron Electronics VN-Matrix 300 User Guide - Manual (Page 56)

VN-Matrix 300 • System Configuration 50
Data input to the server is sent to all clients simultaneously. Data received at a client is sent
to the server. Simultaneous data transfers are processed on a first in first out basis.
Any number of pass-through groups may exist on the same network.
Communication may only take place between a client and a server; it is not possible to
communicate from client to client.
Configuring a Serial Pass-through Group
Server Mode
Decide which device is to be the server.
1. On the Device page, select the peripherals tab.
2. On the Peripherals page, set the mode (
a
) to server.
3. Configure the other settings (
b
) (baud rate, data bits, stop bits, parity, and handshake)
as required.
4. Click the Save All tab.
Figure 37. Serial Pass-through Group — Server Mode