Extron Electronics VN-Matrix 300 User Guide - Manual (Page 33)

VN-Matrix 300 • System Configuration 27
Start Up and Login Procedure
The IP address of the controller is entered into the address bar of the browser in the normal
way.
Figure 13. Entering the IP Address
In the example above, the IP address of the controller is 192.168.0.101.
NOTE: The IP address of the controller in your system will be different.
The login screen will be displayed in the browser (see figure 14).
Login Screen — User Accounts
VN-Matrix 300 has two user accounts:
z
admin — which allows full read/write access to all setup parameters,
z
public — which allows read only access to setup parameters.
Initially the password for both accounts is the same as the user name (that is, the account
name). It is recommended that these are changed once commissioning is complete.
For commissioning use the admin account and click
LOGIN .
Figure 14. Login Screen