Installation and basic setup procedures, Choosing a suitable location, Environmental requirements – Extron Electronics VN-Matrix 300 User Guide User Manual
Page 17: Orientation, Installation and basic setup, Procedures
VN-Matrix 300 • Installation and Basic Setup Procedures
11
Installation
and Basic Setup
Procedures
This section describes basic installation and setup procedures, including:
z
z
z
z
z
z
z
z
Choosing a Suitable Location
The VN-Matrix 300 is designed to be used either as a free-standing unit or to be mounted in
a 19-inch equipment rack using the optional kits available.
CAUTION: Whichever installation method you choose there are certain environmental
requirements, detailed on the following pages, which must be observed in
order to ensure safe and reliable operation.
Environmental Requirements
CAUTION: The criteria on this page must be observed for all installations of the
VN-Matrix 300, whether free-standing or rack-mounted.
Orientation
The VN-Matrix 300 is designed to be used free-standing on a stable, horizontal surface. It
can, however, be used in any orientation subject to the necessary ventilation requirements.