Extron Electronics TLP 350CV Installation - Manual (Page 20)

Main
Vol
Time
IP Exit
Dn Up
Dn
On On
Up
On
Sleep timer: 50000 Sec
Backlight: 073%
Auto
Vid
Motion LED
Backlight
Main Menu
Provides adjustment of the sleep timer and touchpanel
brightness (backlight), and LeD backlight operation for the
side buttons.
Sleep Timer
Sleep mode is activated when there has been a period (0 to
50000 seconds) of inactivity. The backlight is switched off
and the touch screen goes dark. Adjust the sleep timer from
0 to 50000 seconds by pressing the Down or Up buttons.
Sleep mode is overridden by user interaction with the touch
screen or side buttons. The backlight is switched on and the
screen displays the graphics and text that were on-screen as
the sleep timer activated.
NOTE: when the sleep mode is overridden, the first press
is ignored to avoid inadvertent button operation.
Subsequent presses will engage button functions.
Backlight
Sets maximum touchpanel backlighting. Guidely adjust
backlighting from 0 to 100% by pressing the Down or Up
buttons. The current setting is shown just above the buttons.
Auto Backlight
Automatically adjusts the backlight depending on the
ambient light detected by the front panel sensor. Use the
Auto Backlight button to toggle Auto backlight off and on.
Maximum brightness cannot exceed the backlight setting
(see above).
LED Backlight
An LeD backlight illuminates the ten buttons next to the
screen. Use the on-screen button to toggle the option Off
and On.
TLP 350CV • Initial Configuration 14