Back cover:checklist and contact information, Back cover: checklist and contact information, Setup guide checklist – Extron Electronics MLC 104 Plus Series Setup Guide User Manual
Page 60
Setup Guide Checklist
c
Chapter 1
: Install Global Configurator
• Download from
www.extron.com
, or
• Install from Extron Software Products CD
c
Chapter 2
: Make the MLC cable connections.
1.
c
Power
2.
c
Local Area Network (LAN) – IP models only
3.
c
Devices
c
Chapter 3
: Configure MLC 104 Plus Series using Global
Configurator.
1.
c
Download device drivers.
2.
c
Create a new Global Configurator project file.
3.
c
Add a device and (for IP models) set its IP address.
4
c
Define the location of the new device.
5.
c
Save the new Global Configurator file.
6.
c
Configure e-mail server. (IP models only)
7.
c
Configure e-mail messages. (IP models only)
8.
c
Configure contacts. (IP models only)
9.
c
Assign serial device drivers.
10.
c
Assign IR drivers.
11.
c
Configure the front panel.
12.
c
Configure associated control modules.
13.
c
Create a shutdown schedule.
14.
c
Create a lamp hour notification. (IP models only)
15.
c
Create a disconnect notice. (IP models only)
16.
c
Build the Global Configurator file.
17.
c
Upload the Global Configurator file.
18.
c
Launch GlobalViewer. (IP models only)
19.
c
Test the MLC’s setup.
Back cover:
checklist and contact
information